HP ProCurve Gig-T/SFP Module (J8705A) Hewlett Packard Enterprise - 1
  • HP ProCurve Gig-T/SFP Module (J8705A) Hewlett Packard Enterprise - 1

HP ProCurve Gig-T/SFP Module (J8705A)

$283.65
Tax excluded
Quantity
In Stock
0 review(s)

Hewlett Packard Enterprise 20-port 10/100/1000 PoE + 4-port mini-GBIC. Ethernet interface type: Gigabit Ethernet, Ethernet LAN data rates: 10,100,1000 Mbit/s, Copper ethernet cabling technology: 1000BASE-T,100BASE-TX,10BASE-T. Fiber optic connector: SFP. Data transfer rate: 1 Gbit/s. Compatibility: ProCurve Switch 5400zl. Dimensions (WxDxH): 261.6 x 206.5 x 44.5 mm, Weight: 1 kg

Shipping Terms

Legal Disclaimer

Terms and Conditions
Used
J8705A
5 Items

Data sheet

Model Number
J8705A
POE Output
802.11af/at
Warranty
Lifetime
Number of Ethernet Ports
20x 1GBe Ethernet
Number of SFP Ports
4x 1GBe SFP
Details

Line interface modules:

  • The 24-port 10/100/1000-T module has PoE standard (J8702A).

  • The 20-port 10/100/1000T-PoE + 4 mini-GBIC module (J8705A) can be used in those circumstances where fiber connections are needed as downlinks to other switches at a distance, or as switch-to-switch connections. They can be trunked to provide up to 4 gigabits of connectivity. Port trunks, or LAG, can operate across multiple modules to increase redundancy as well.

  • The 4-port 10GbE X2 module (J8707A).

  • The 24-port mini-GBIC module (J8706A) can be used as an aggregator in a distribution environment.

  • The 4-port 10GbE CX-4 module (J8708A) can be used as a low-cost 10G interconnect between two switches in a closet or data center, or to provide high-speed downlinks to another switch supporting CX4 connections. The CX-4 ports support in-line power for media converters used for longer haul fiber connectivity.

Power supplies:

The switch 8212zl supports two power supplies:

  • 875 W. This power supply (J8712A) provides 600 W chassis power and 273 W PoE power. This supply runs on 110 V @ 15 A or 230 V @ 10 A.

  • 1500 W. This power supply (J8712B) provides 600 W chassis power and 900 W PoE power. This supply runs on 200-240 V @ 10 A.

PoE power from the supplies is additive when configured as auto-failover power. Both power supplies can be in the same chassis simultaneously. Maximum power on any PoE port is 15.4 W, although most PoE clients use about 7-10 W. The switch will direct only the power needed to each port.

No customer reviews for the moment.

16 other products in the same category: